|Place of Origin:||China|
|Minimum Order Quantity:||50pcs|
|Packaging Details:||Packed in foam firstly,and then reinforced with cloth case for outer packing|
|Delivery Time:||15 working days after received your payment|
|Payment Terms:||T/T or western Union|
|Supply Ability:||3,000pcs per month|
|Color:||RAL Color||Galvanized Thickness:||85um|
Q235 steel material hot dip galvanized conical round street lamp poles with cloths packed for roadway
Round tapered(conical) street light poles are most widely used worldwide in street lighting. By utilizing a wide range of advanced equipments, Shuguang design and manufacture steel round tapered poles and brackets in various patterns to conform to variety of requirements from our customers all over the world.
Our round tapered poles are available in mounting height from 3 to 14m(one piece joint),two moulds are available with us: one taper is 11/‰,the other 14/‰,poles of taper 10-15‰ can be made. The poles can be used for post top or bracket arm applications. Integral bracket arm arrangements are also available.
Zhejiang Shuguang Lamps CO., LTD. is fully ISO 9001 compliant and its welding procedures are in conformity with BS EN 287,BS EN ISO 15614-1 and AWS D1.1
Maximum length(one piece): 14m
Minimum top diameter: 60mm
The thickness of galvanization will be according to thickness of poles.
Normally 4mm pole, average thickness of galvanization is at average of 100μm
|Type||Street Lamp pole, lamp post . Lamp column|
|Shape||Conoid ,Multi-pyramidal,Columniform,polygonal or conical|
|Material||Usually Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2
As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490ST52
|Torlance of dimenstion||-0.02|
|Design Load in Kg||300~ 1000 Kg appliced to 50cm from the to pole|
|Surface treatment||Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required.|
|Standard||Octagonal tapered column
Certified by SIRIM QAS INTERNATIONAL.
Approved by JABATAN KERJA RAYA MALAYSIA.
Conforms to Standard:
Pole design : BS EN 40
Material : BS EN 10025 S275 / JIS G3101 SS400
Welding : BS 5135
Galvanizing : BS 729 / ISO 1461 ASTM A 123
|Length of per section||Within 14m once forming without slip joint.|
|Option||Height from 6m to 12m
Flange mounted or planted type
Variable arm length from 0.125m to 3.0m with single or double arm type
Variable spigot size from 35mm to 60mm.
|Production Process||Raw material test → Cutting →Molding or bending →Welidng (longitudinal )→Dimension verify →Flange welding →Hole drilling →Calibration → Deburr→Galvanization or powder coating ,painting →Recalibration →Thread →Packages|
No crack, no leakage welding, no bite edge, weld smooth level off without the concavo-convex fluctuation or any welding defects.
Hot Dip Galvanizing Process:
Inside and outside surface anti-corrosion treatment by hot dipping acid. Zinc coating is more than 85 um thick, which is in accord with GB/T13912-92 standard. Designed life of pole is more than 30 years, and the galvanized surface is smooth and with the same color. Flake peeling hasn’t been seen after maul test.
Powder Coating Process:
Pure polyester plastic powder coating is stable, and with strong adhesion & strong ultraviolet ray resistance. Film thickness is more than 100 um and with strong adhesion. The surface is not peeling even with blade scratch (15 * 6 mm square). Surface is smooth and color and luster are identical.
Lifetime: >20 years
Color: (grey)or customized